14
Bluetooth®
쏅 Press the button
7
to open the Blue-
tooth® menu.
쏅 Press the
/ button
7
repeatedly until
the desired menu item is selected.
쏅 Perform the setting (see the following sec-
tions).
쏅 Brie y press the MENU button
2
to exit the
menu.
Notes:
• The Bluetooth® menu is automatically ex-
ited approx. 30 seconds after the last but-
ton activation and you are returned to the
display of the current audio source.
• In the menu, you can press the button
7
in each case to return to the higher
menu level.
• If a Bluetooth® process is running (e.g.
re-establishing the connection to the last
connected device), the functions of the
Bluetooth® menu are blocked. If you at-
tempt to open the Bluetooth® menu dur-
ing this time, "LINK BUSY" brie y appears
on the display. If you want to cancel the
Bluetooth® process and open the Blue-
tooth® menu, press the
button
=
.
Pairing and connecting a device
Note:
You can pair up to 5 Bluetooth® devices with
this car sound system. If you register a sixth
one, the Bluetooth® device registered rst is
unregistered.
Pairing and connecting a cell phone
Note:
If a connection with a cell phone currently ex-
ists, this connection is automatically discon-
nected if you pair and connect another cell
phone.
쏅 In the Bluetooth® menu, select the "PAIRING"
menu item.
쏅 Press the
button
7
to pair a cell phone.
The display shows "PAIRING" and the Blue-
tooth® symbol
is ashing. The car sound
system can now be recognised by a Blue-
tooth® cell phone for approx. 2 minutes and
connected.
쏅 Search the car sound system from your cell
phone (Bluetooth® name: "BLAUPUNKT").
As soon as the car sound system is located
by the cell phone and is to be connected, the
display brie y shows "ENTER PIN" and the cur-
rently stored PIN (by default "1234").
쏅 Establish the connection from your cell
phone. Enter the PIN displayed by the car
sound system.
The display may show "PAIRED", followed by
"CONNECTED", as soon as the car sound sys-
tem and the cell phone are paired and con-
nected.
Notes:
• If no connection can be established, the
display brie y shows "CONNECT FAILED".
• If the telephone connected last cannot be
located after switching on the car sound
system, the car sound system attempts
to connect one of the other paired tele-
phones. If none of the telephones can
be located, the display brie y shows "NO
DEVICE".
Pairing and connecting a Bluetooth®
streaming device
Note:
If a connection with a streaming device cur-
rently exists, this connection is automatically
disconnected if you pair and connect another
streaming device.
쏅 In the Bluetooth® menu, select the "PAIRING"
menu item.
쏅 Press the
button
7
to pair a streaming
device.
The display shows the currently stored PIN
(default "1234"). If required, enter the PIN of
the streaming device:
To Next Page
Loading...
Need help?
General
