20
User settings
User settings
Calling the user menu and selecting
a menu
쏅 Brie y press the MENU button
2
to open
the user menu.
In the user menu, the user settings can be found in
the following menus:
• TUNER
• AUDIO (see chapter "Sound settings")
• DISPLAY
• VOLUME
• CLOCK
• VARIOUS
• BLUETOOTH (Heidelberg 220 BT only, see chap-
ter "Bluetooth®")
쏅 Press the
/ button
7
repeatedly until
the desired menu is selected.
쏅 Press the
button
7
to open the selected
menu.
쏅 Press the
/ button
7
repeatedly until
the desired menu item is selected.
쏅 Perform the setting (see the following sec-
tions).
쏅 Brie y press the MENU button
2
to exit the
menu.
Notes:
• The menu is automatically exited approx.
16 seconds after the last button activation
and you are returned to the display of the
current audio source.
• In the menu, you can press the button
7
in each case to return to the higher
menu level.
Making settings in the "TUNER"
menu
RDS
Switching the RDS function on or o . Settings: ON,
OFF.
쏅 Press the
button
7
to open the submenu.
쏅 Turn the volume control
4
to change be-
tween the settings.
TRAFFIC (tra c information)
(only for reception area EUROPE)
Only possible in FM radio mode: Switching prior-
ity for tra c announcements on or o . Settings:
ON, OFF.
쏅 Press the
button
7
to open the submenu.
쏅 Turn the volume control
4
to change among
the settings.
If priority is switched on for tra c information, the
display shows the icon
.
TUN BAND (band selection)
Activating or deactivating memory banks.
Memory banks that can be deactivated:
Region Memory banks
EUROPE FM2, FMT, MW
USA FM2, FMT, AM, AMT
S-AMERICA FM2, FMT, AM, AMT
THAILAND FM2, FMT, AM, AMT
Settings in each case: ON, OFF.
쏅 Press the
button
7
to open the submenu.
쏅 Press the
/ button
7
repeatedly until
the desired memory bank is displayed.
쏅 Press the
button
7
to change the setting.
쏅 Turn the volume control
4
to toggle be-
tween the settings ON (activate memory
bank) and OFF (deactivate memory bank).
To Next Page
Loading...
Need help?
General
