&/(-*4)
Listening to stored stations
Select the memory bank or waveband.
Press one of the station buttons 1 - 6
.
The stored station is played if it can be re-
ceived.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefly. You can set the
scanning time in the menu to between 5
and 30 seconds.
Starting SCAN
Press and hold down the MENU button
for longer than two seconds.
Scanning begins.
"SCAN" appears briefly in the display fol
-
lowed by a flashing display of the current
station name or frequency.
Cancelling the SCAN and continuing to
listen to a station
Press the MENU button .
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
Press the MENU button .
Press the
or button repeat-
edly until "SCAN TIME" appears on the
display.
Set the desired scan time using the
or button .
*
*
*
*
*
*
*
When you have finished making your chang-
es,
press the
MENU button twice .
Note:
The defined scanning time is also ap-
plied by the system to scanning carried
out in CD and CD changer mode.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they are
broadcasting. Your car radio can receive
and display this information.
For example, the programme types can be:
CULTURE TRAVEL JAZZ
SPORT SERVICE POP
ROCK KNOWLEDGE KIDS
You can use the PTY function to select sta-
tions of a particular programme type.
PTY-EON
If you specify the programme type and start
seek tuning, the radio will switch from the
current station to a station of the selected
programme type.
Notes:
If the tuner does not find a station
that corresponds to the selected pro-
gramme type, you will hear a beep
and "NO PTY" appears briefly in the
display. The radio will then retune to
the station that it received last.
*
•
Radio mode
To Next Page
Loading...
Need help?
General
