Blaupunkt XEASY - 4.8 Installing and 4.9 Connecting the Bluebot Robotics app

45
EN
4.7 Setting the time
Set the time with the remote control as follows:
1. Press the CLK button on the remote control and hold for 3 seconds.
Onthe remote display the hour numbers will ash.
2. Press the Up or Down direction buttons to set the hour.
3. Press the Right direction button to conrm.
The minute numbers will now ash.
4. Press the Up or Down direction buttons to set the minutes.
5. Press the Right direction button to conrm.
The set day will ash.
6. Press the Left or Right direction buttons to set the day.
7. Press the CLK button to conrm.
NOTICE
The remote’s Current Clock Time function is solely to display the time and
does not reect or interfere with the scheduled time for cleaning.
4.8 Installing the Bluebot Robotics app on your mobile phone
NOTICE
•
Make sure your mobile phone is connected to WiFi.
•
Swipe your screen down to update the data.
1. Download the Bluebot Robotics app on your mobile phone from the
Google Play or Apple Store.
2. Install the Bluebot Robotics app on your mobile phone.
3. Log in if you have already an account or register. To register ll in your
username, e-mail and password.
You are now ready to connect the Bluebot Robotics app to your robot.
Seesection 4.9.
4.9 Connecting the Bluebot Robotics app to your robot
NOTICE
Make sure your mobile phone is connected to WiFi. Make sure your
phone is connected to 2.4 Ghz. The app does not function when you are
connected to 5 Ghz.
1. Go to the Home screen and tap the "+" button.
2. Select "Add Device".
3. Select the BluebotXE, see Figure 13.
4. Make sure the power switch on the robot is in ON position.