Blaupunkt XEASY - Robot Operation and Modes; 5.2 Running the robot

48
5.1 Before running the robot
Make sure that before you start running the robot:
•
You have prepared the area (see section 4.3 and section 4.4).
•
The robot has been charged (see section 4.5).
•
The oor environment has been cleaned of all fragile objects and cords,
clothing, paper and loose cables.
•
All curtains and drapes are lifted o the oor to avoid any possible
accidents.
•
Make sure that the power switch is on.
•
Place the robot in the charging station.
5.2 Running the robot
Spot N/A Press on MODE
on the remote
control twice.
Choose Mode 1.
Tap on
OPERATION.
Select SPOT.
EN: Alexa, ask Bluebot
to start area cleaning
DE: Alexa, starte Spot-
Reinigung mit Bluebot
Auto Press the
Start/Stop
button
(once or
twice)*
Press the ON/
OFF button
(once or twice)*
Or choose
Mode 2.
Tap on START **
or tap on
OPERATION
and Select
AUTO.
EN: Alexa, ask Bluebot
to start cleaning
DE: Alexa, starte die
Reinigung mit Bluebot
Edge N/A Press MODE
on the remote
control. Choose
Mode 3.
Tap on
OPERATION.
Select EDGE.
EN: Alexa, ask Bluebot
to start edge cleaning
DE: Alexa, starte Rand-
Reinigung mit Bluebot
ZigZag N/A Press MODE
on the remote
control. Choose
Mode 4.
Tap on
OPERATION.
Select ZIGZAG.
EN: Alexa, ask Bluebot
to start zigzag cleaning
DE: Alexa, starte Zig-
zag-Reinigung mit
Bluebot
Send to
charging
station
N/A Press HOME Tap on "Re-
charge" in the
Operation
screen
EN: "Alexa, ask Bluebot
to start charging"
DE: "Alexa, lade den
Bluebot auf"
* Depending on the robot’s status
** Only works when the robot is in Standby
5. OPERATION
Table 8 - Activating the cleaning modes
explained for dierent control types