Blaupunkt XEASY - 7.2 Cleaning the dust bin and the filters

53
EN
7.2 Cleaning the dust bin and the lters
To clean the dust bin and the lters, do the
following:
1. Make sure the power switch is o.
2. Press on the release button and pull the
dust bin out of the robot.
3. Open the dust bin.
4. Take out the primary lter.
5. Take out the HEPA lter.
6. Empty the dust bin.
7. Wash the dust bin and primary lter with
water and clean the HEPA lter with a
brush. Let the primary lter air dry.
1
CAUTION
Do not dry the primary lter and HEPA lter in
direct sunlight.
8. Place the primary lter and HEPA lter in
the dust bin. Make sure the primary lter is
fully dry.
9. Place the dust bin in the robot.