EasyManua.ls Logo

Blaze BLZ-3 - Electronic Ignition Lighting; Manual Lighting Procedure

Blaze BLZ-3
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Blaze Grills by Blaze Outdoor Products Instructional Book
22
Lighting the Grill
1. Open the hood.
2. Use caution when lighting burners by standing as far away from the burners as possible.
3. To ignite burners, push the burner knob in and slowly rotate counter-clockwise to the high
position.
4. You will hear a loud click as the electronic lighter produces a spark. Listen for the sound
of the gas igniting and look for a flame through the cooking grids. If the burner does not
light on the first try, repeat immediately.
5. If the burner does not light in 5 seconds then wait five minutes until the gas clears before
attempting to light it again. Repeat the procedure or try the manual lighting procedure
below.
6. Upon successful lighting, repeat the process on the other burners you wish to light.
7. To shut off the burners, rotate the knob and turn to OFF.
8. It is normal to hear a popping sound when the burners are turned off.
Manually Lighting the Grill
WARNING: Do not use standard matches or cigarette lighters to perform match-lighting
procedures. Serious burns can occur and lighters can explode.
1. Open the hood.
2. If you have just attempted to light the burner, allow five minutes for any accumulated gas
to dissipate.
3. Use caution by standing as far away from the burners as possible.
4. Light and insert a long stem match, holding it near the Lighting Tube.

Related product manuals