Blaze Grills by Blaze Outdoor Products Instructional Book
23
5. Push in and turn the control knob to HIGH.
6. If the burner does not light after five seconds, turn the control knobs to the OFF position.
7. Wait five minutes until the gas clears before attempting to light it again.
8. If the burner does not light after several attempts, immediately close all gas valves and
consult an authorized service technician.
WARNING: “Flashback” may occur in or around the burner tubes. Flashback exhibits a
characteristic “whooshing” sound. If this should occur, immediately turn off your burners,
then remove and clean them with soap and water and a brush until all foreign objects are
removed.
First Time Operation
MAIN BURNERS:
Before cooking with your grill for the first time, burn off any foreign matter and rid the unit of
any odors by operating the unit for about five minutes.
When lit, the flame should have a bluish color to it. It may have a tint of yellow and adjustment
to the air shutters can be made to obtain a blue flame and proper gas flow.
The grill should be preheated with the main burner control settings on HIGH for five minutes
with the hood closed.
To Next Page
Loading...
