1110
5.6 CLASSIC 575™
SMOOTHIE
This cycle is designed specifically for various types of smoothies and thick
drinks that frequently use dense or frozen ingredients� It slows down and speeds
up automatically during the course of the cycle� This allows the blender to draw
the ingredients into the blending vortex, creating the desired texture�
ONE-TOUCH TIMED CYCLES
The Classic 575 comes equipped with 2 one-touch timed cycles: a
60-second one and a 90-second one� These cycles free your hands for
other kitchen tasks and are ideal for recipes that require longer blending
times, such as hot soup or bread dough�
CLEAN
This cycle automatically cleans the inside of your blender jar�
To use the Clean cycle:
1� Add 1 cup (240ml) of water and a drop of dish soap to the blender jar�
2� Secure the lid on the jar and place the jar on the blender motor base�
3� Press the Clean button�
4� Once the cycle is complete, remove the jar, and rinse it out�
5� For the best results, use the Clean cycle immediately after blending�
INCREMENTAL SPEEDS
The Classic 575 comes with five incremental speed cycles that allow you to
completely customize the consistency of the product you are blending�
• Lo
• Medium-lo
• Medium
• Medium-hi
• Hi
You can switch to a different speed at any point during the cycle� To stop the
cycle at any point while blending, press Stop�
PULSE
The Pulse function is used for chopping, mincing, whipping, or other momentary
tasks that do not require a long blend cycle� You can also use Pulse
to quickly
stir a blended product before serving it�
The Pulse setting runs at speed 7 and only while the Pulse
button remains
pressed� When the button is released, the motor shuts off�
SECTION 6: CARE AND CLEANING
6.1 CLEANING AFTER USE
1� Add 1 cup (240ml) of hot water and a drop of liquid dish soap to the blender jar�
2� Place the lid tightly onto the jar�
3� Place the jar on the base and, with your hand placed on top of the lid, the Pulse
button for 5 seconds or press the Clean cycle button�
4� Rinse well�
5� Clean the blender base by simply wiping the base and interface with a damp cloth�
6.2 LONG-TERM SANITATION
1� Fill the blender jar with hot water�
2� Add one to two teaspoons (5-10ml) of liquid chlorine bleach to the jar�
3� Stir for 10 seconds to mix the water and bleach� Let the mixture stand in the blender
jar for 5 minutes�
4� Empty the water/bleach mixture and leave the jar upside down on a dish rack until dry�
6.3 CLEANING TIPS AND CAUTIONS
1� DO NOT use stiff bristled brushes or abrasive cloths/pads to clean the blender motor
base or jar, as this will dull or scratch the surface�
2� NEVER submerge the blender motor base in water� Avoid submerging the blender jar
for more than 5 minutes� Water penetration through the lower jar seals will reduce the
life of the jar� After cleaning, we recommend the blender jar be stored upright�
3� THE BLENDER JAR IS DISHWASHER SAFE (TOP RACK ONLY)!
4� Extreme temperatures will damage the lower seal of the jar� We recommend hand
washing to prolong the life of the blender jar� We do not recommend the jar be
exposed to temperatures above boiling (212°F or 100°C)�
ENGLISH
To Next Page
Loading...
