6
Storage
After you have finished milling, clean and store your machine properly. The milling chamber is
completely self cleaning. Just run the mill for about 5 seconds after all of the grain inside the
mill has been processed. This eliminates remaining flour in the chamber. You can use a soft
cloth or small brush to remove any extra flour from the bottom of the mill. The polycarbonate
mill pan is easy to clean. The pan will fit over the top of the mill, which is handy for storage
under the counter or in a cabinet. The cord is easily coiled inside the cyclone cup. The pan
then fits over the top, like the mill was when first taken out of its packaging box.
8
To Next Page
Loading...