www.blendtec.com
Turn the mill upside down and attach the cyclone cup to the bottom of the mill. Align the
handle of the cup in the position shown. Be sure to empty the cyclone cup after each milling
session. Any flour you find in the cup is perfectly good and should be used. The function of the
cyclone cup is to separate the flour from the air as it passes through the mill.
1
Attach cup and position as shown
Micronetic™ Milling Chamber
Micronizer Unit consists of:
Rotor
Stator
Cyclone cup
3
Operating Instructions
To Next Page
Loading...