PLEASE READ THESE
IMPORTANT SAFEGUARDS
Basic safety precautions should always be followed:
1. Read all instructions before using the appliance.
2. Do not subject the unit to water. Never submerge the unit in water or other liquid.
3. Close supervision is necessary when used by or near children.
4. Unplug from electrical outlet when not in use, before putting on or taking off parts, and
before cleaning.
5. Avoid direct contact with moving parts.
6. Do not operate any appliance it the cord or plug appears to be damaged, or after the
appliance malfunctions, or is dropped or damaged in any manner.
7. Do not use outdoors.
8. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
9. Check grain and hopper for the presence of foreign objects before using.
Before you turn the machine on...
Please take a moment to read the instructions in this booklet. It is important to first attach the
cyclone-cup to the base of the mill. This is easy to do (See page 3). Make sure the mill fits
firmly on the flour pan and the two hold-down latches have snapped into place. Please
be sure any grain you put in your Kitchen Mill
™
is clean. Your warranty does not cover foreign
objects like nails or other pieces of metal that could enter and cause damage to your mill.
The first cup of grain you run through your machine may contain a black fine dust. Discard this flour
and continue to mill.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...