20
Button 5: Large Smoothie 2
Button 6: 50 Seconds @ Speed 7
Milkshake Profile
Button 1: Small Milkshake
Button 2: Granita / Medium Milkshake
Button 3: Milkshake w/Frozen Fruit
Button 4: Large Milkshake 1
Button 5: Large Milkshake 2
Button 6: Large Milkshake 3
4.2.5 11-Speed Capacitive Touch Slider + Pulse
Touch the mode button to switch from automatic to manual operation mode
and the 11-speed capacitive touch slider� The capacitive touch slider provides
seamless precision speed control; simply slide your finger to adjust your
blender’s speed� The blender will run for 90-second intervals in this mode�
Select the Pulse function to add a burst of speed and power�
NOTE: The 11-Speed Capacitive Touch Slider is not available on the
Stealth 885 model
4.2.6 Advanced Programming and Diagnostics
Use the programming mode to:
• Select a profile
• Change preprogrammed cycle numbers
• Check blend cycle counts
• Check the diagnostic error log
• Use a custom profile designed via the Blend Wizard™ (Blendtec’s online
programming tool)
To enter programming mode:
1� Touch and hold cancel/exit button for 3 seconds�
2� Use the scroll arrow and the select icon to scroll and select the desired function�
Note: To return to the main menu from any submenu area, tap the cancel/
exit button until the main menu screen appears.
The options available from the main menu are listed below (numbered as
displayed in the blender):
1. PROFILES
1. Standard Profiles
1� Smoothie
2� Coffee
3� Multipurpose
4� Milkshake
2. Custom Profiles
2. BLEND CYCLES
1. Standard Blend Cycles
1� Salsa
To Next Page
Loading...
