8
Smoothie Profile
Button 1: Small Smoothie w/Fresh Fruit
Button 2: Medium Smoothie 4
Button 3: Granita / Medium Milkshake
Button 4: Medium Smoothie 3
Button 5: Large Smoothie 4
Button 6: 50 Seconds @ Speed 7
Coffee Profile
Button 1: Small Margarita / Ice Cappuccino
Button 2: Large Ice Cappuccino
Button 3: Small Slushy / Milkshake
Button 4: Granita / Medium Milkshake
Button 5: Large Smoothie 2
Button 6: 50 Seconds @ Speed 7
Milkshake Profile
Button 1: Small Milkshake
Button 2: Granita / Medium Milkshake
Button 3: Milkshake w/Frozen Fruit
Button 4: Large Milkshake 1
Button 5: Large Milkshake 2
Button 6: Large Milkshake 3
4.1.4 Advanced Programming and Diagnostics
Use the programming mode to:
• Select a profile
• Change preprogrammed cycle numbers
• Check blend cycle counts
• Check the diagnostic error log
• Use a custom profile designed via the Blend Wizard™ (Blendtec’s online
programming tool)
To enter programming mode:
1� Touch and hold cancel/exit button for 3 seconds�
2� Use the scroll arrow and the select icon to scroll and select the desired function�
Note: To return to the main menu from any submenu area, tap the cancel/
exit button until the main menu screen appears.
The options available from the main menu are listed below (numbered as
displayed in the blender):
1. PROFILES
1. Standard Profiles
1� Smoothie
2� Coffee
3� Multipurpose
4� Milkshake
To Next Page
Loading...
