32
Advanced Programming and Diagnostics
Use the programming mode to:
• Select a profile
• Change preprogrammed cycle numbers
• Check blend cycle counts
• Check the diagnostic error log
• Use a custom profile designed via the Blend Wizard™ (Blendtec’s online
programming tool)
To enter programming mode:
1�Touch and hold buttons 2 and 4 for 1 second�
2�Use button 1 to scroll and button 5 to select the desired function�
Note: To return to the main menu from any submenu area, tap the pulse button
until the main menu screen appears.
The options available from the main menu are listed below (numbered as
displayed in the blender):
1. PROFILES
1. Standard Profiles
1� Smoothie
2� Coffee
3� Multipurpose
4� Milkshake
2. Custom Profiles
2. BLEND CYCLES
1. Standard Blend Cycles
1� Salsa
2� Batter
3� Whole Juice
4� Soup
5� Ice Cream
6� Small Margarita / Ice Cappuccino
7� Large Ice Cappuccino
8� Ice Crush / Milkshake
9� Small Slushy / Milkshake
10� Small Milkshake
11� Granita / Medium Milkshake
12� Milkshake w/Frozen Fruit
To Next Page
Loading...
