Blendtec STEALTH 895 - Page 36

34
Selecting the Desired Profile
• 1�Press and hold buttons 2 and 4 for 1 second to enter the menu�
• 2� Press button 1 to scroll to the Profiles menu and press button 5 to select�
• 3�Use buttons 1 and 5 to scroll and select either the Standard Profiles or
Custom Profiles category�
• 4�After selecting the Standard or Custom Profile category, you can scroll through
• the profiles in the category using button 1 and select the desired profile using
button 5�
• 5�“Make this the active profile?” will appear on the screen� Press button 5 to
confirm or pulse button to cancel and return to the previous menu
4.3.2 Changing Programmed Cycle Buttons
Temporarily Change Cycle Buttons
• To temporarily change cycle buttons when working in a selected profile,
complete the following steps:
• 1�Press and hold buttons 2 and 4 for 1 second to enter the menu�
• 2�Press button 1 to scroll to the Blend Cycles menu and press button 5 to
select�
• 3�Use buttons 1 and 5 to scroll and select either the Standard or Custom Blend
Cycles category�
• 4�Use button 1 to scroll and find your desired cycle, then press button 5 to
select�
• 5�Press the button you want to assign to the cycle, then press button 5 to
confirm or pulse button to cancel and return to the previous menu�
• Note: After you have customized a cycle to a button, you will notice that an
asterisk appears after the profile name when you return to operation
• mode� Loading a new profile on your blender will reset the profiles back to
default cycle buttons�
Permanently Change Cycle Buttons
To permanently change the cycle buttons in a profile you can export the revised
profile to a USB drive and then import the profile on the blender� Or you can edit
the profile using the Blend Wizard (my�blendtec�com), and then export the profile
to the blender�
Temporarily Disable Cycle Buttons
To temporarily disable a number or cycle button when working in a selected
profile, complete the following steps: