4
SECTION 1
IMPORTANT INFORMATION
Read all instructions carefully before using your Total Blender™
1.1 SAFETY CERTIFICATION
The Total Blender is certified by ETL (Report No. 3018204-4,
3018204-2 & 3018204-3) to comply with UL standard 982 4th ed.
11-29-2001, and to CSA standard C22.2 No. 195-m 1987, Nov. 1990,
R 1994
1.2 TOTAL BLENDER CERTIFICATION
The Total Blender and its accessories are certified by NSF Interna-
tional (NSF) under Blendtec in the NSF Official Listing.
1.3 AVOID CONTACT WITH MOVING PARTS
• Keep fingers, hands, hair and clothing away from all moving parts.
• Keep all utensils away from the drive socket and blender jar blades during
operation. Metal utensils may damage blades.
• NEVER put hands into the blender jar or add substances by hand when the
blender jar is on the motor base.
• NEVER touch the blade with your fingers whether it is on or off the motor base.
• NEVER place jar into drive socket if blender motor is operating.
• DO NOT rock the blender jar during operation.
These precautions will prevent personal injury and/or damage to the blender.
1.4 NEVER OPERATE THE BLENDER IF IT APPEARS DAMAGED
If the blender malfunctions call your service agent first. If it is dropped or damaged in
any way, return the blender to a Blendtec service agent immediately for examination,
repair, electrical or mechanical adjustment, or possible replacement.
1.5 NEVER OPERATE BLENDER IN LIQUID
To protect against the risk of electrical shock do not put the motor base in water or
other liquid. Do not use the blender outdoors where it is subject to precipitation.
1.6 NEVER PUT NON-FOOD ITEMS INTO JAR
Metal utensils, rocks, and glass are dangerous if placed in jar. Damage caused by
such foreign objects will void the warranty. Keep hands and utensils out of jar while
blending to reduce the risk of severe injury to persons or damage to the blender.
Utensils may only be used when the blender is not running.
1.7 NEVER OPERATE THE BLENDER WITHOUT THE LID IN PLACE
To Next Page
Loading...
