Operating instructions
Inspection and servicing
102620 • 05/2019
Automatic condensation water drain
To spare you the daily draining of condensa-
tion water.
Oil and water separator
Is fitted downstream of the condensation
water drain. The separated water can be re-
moved directly into the sewer system.
Rubber-metal connection
To reduce vibrations.
Sound-absorbing hood
To reduce noise emissions.
For more information on these and
other pneumatic accessories, please
refer to BLITZ. Our address is on the
last page of these operating instruc-
tions.
5 Inspection and servicing
5.1 Safety instructions
The inspection and servicing may be carried
out by experts or trained persons only.
Switch the compressor off for all servicing
work, and protect the unit against uninten-
tional operation.
Prior to any servicing work set the power
switch to off or remove the mains plug.
Use original BLITZ parts and approved
operating material only.
After having completed the servicing work
tighten all screws again.
Depressurise the compressor prior to any
servicing work.
Touch the compressor system at the on
and off switch only during and shortly af-
ter operation. Permit the compressor to
cool down prior to any servicing work. Hot
surfaces can cause severe injuries.
To Next Page
Loading...
