Operating instructions
Maintenance schedule
102620 • 05/2019
6 Maintenance schedule
The intervals mentioned are experimental values. They can differ considerably depend-
ing on the application conditions.
Key:
Measure to be carried out:
Measures to be carried out, if the operating hours are not made within
the time interval.
1
Check daily in dusty conditions and replace, if and when necessary.
Check the oil level (cf.
chapter 5.2).
Change the oil (cf. chap-
ter 5.3).
Drain the condensation
water (cf. chapter 5.4).
Check the suction filter
cartridge and change, if
and when necessary (cf.
chapter 5.5).
Tighten the screw con-
nections (cf. chapter 5.6).
Check the compressor
valves and replace them,
if and when necessary.
Measures carried out on
(date):
Measures carried out by
(name):
To Next Page
Loading...
