Blizzard BIM40 - User Manual

Questions and Answers

A
angela96Aug 5, 2025
What to do if my Blizzard BIM40 Ice Maker shuts down every 3 minutes and shows error E04 or E06?
- S
  Shannon HernandezAug 5, 2025
  If your Blizzard Ice Maker shuts down every 3 minutes after startup and displays E04 or E06, it could be due to several reasons. The ambient temperature might be too high; the normal working temperature range is 12-32 °C. The condenser might be dirty and blocked, requiring cleaning. Alternatively, the high pressure switch wires may have fallen off, needing reconnection, or the fan might not be starting, which requires inspection and correction.
S
Stacey MartinAug 10, 2025
Why is my Blizzard Ice Maker too slow in ice making?
- C
  Christopher FaulknerAug 10, 2025
  If your Blizzard Ice Maker is making ice too slowly, several factors could be responsible. The condenser or air filter might be dirty, requiring you to clean them. A high ambient temperature could be the cause; the normal working temperature range is 12-32 °C. Poor ventilation around the ice machine can also slow down ice production, so check the surrounding environment. Finally, ensure the water supply temperature is within the range of 5-35 °C, as high water temperature can also affect the ice-making speed.
E
Evan EvansAug 15, 2025
Why are the ice cubes from my Blizzard BIM40 not transparent?
- M
  Michelle JosephAug 15, 2025
  If the ice cubes from your Blizzard Ice Maker are not transparent or are too thin/incomplete, there are a few things you can check. First, ensure that the ice thickness setting is correct. Low water pressure can also cause this issue, so verify that the water supply pressure is between 0.13MPa and 0.55MPa. The water temperature should be between 5-35 °C. Also, inspect the inlet water valve to make sure it is working correctly and is not dirty.
Z
zandersonAug 20, 2025
Why is the ice defrosting abnormally in my Blizzard BIM40 Ice Maker?
- M
  Megan RamirezAug 20, 2025
  If the ice in your Blizzard Ice Maker is defrosting abnormally, it could be due to a few reasons. The ambient temperature might be too low; ensure it's within the normal working range of 12-32 °C. Also, check the defrost valve to ensure it's functioning correctly. Finally, verify that the ice thickness setting is appropriately adjusted, as incorrect settings can lead to abnormal defrosting.
F
fmyersAug 26, 2025
How to fix a Blizzard BIM40 Ice Maker when the indicator light is off?
- A
  andre37Aug 26, 2025
  If the indicator light on your Blizzard Ice Maker is off, it could be due to a couple of simple issues. First, make sure that the power switch is turned on. If it is, check the plug and socket to ensure they are properly connected.
S
sharon90Aug 30, 2025
How to reduce noise from my Blizzard BIM40 Ice Maker?
- C
  Crystal AdkinsAug 30, 2025
  If your Blizzard Ice Maker is making too much noise, it might not be placed on a level surface. Make sure the ice machine is leveled properly.

Summary

Key Information and Warnings

Safety Labels and Operational Symbols

Details warning labels for electrical shock, flammable agents, and explains operational symbols.

Comprehensive Safety Guidelines

Operational Safety Precautions

Provides comprehensive safety advice for installation, operation, handling, and environmental considerations.

General Usage and Applications

Commercial Application Areas

Outlines common commercial locations and occasions for using the ice maker.

Ice Maker Installation Guide

Installation Site Requirements

Specifies environmental conditions and placement criteria for optimal ice machine installation.

Installation Connection Diagram

Visual representation of water and drain connections, power, and required filter placement.

Installation Procedure Steps

Step-by-Step Installation

Step-by-step instructions for checking accessories, cleaning, placing, and connecting the ice machine.

Startup and Initial Operation

Pre-Operation Checklist

Confirms essential checks before powering on the ice machine for the first time.

Ice Making Operation Details

Confirming Normal Operation

Key indicators to confirm the ice machine is functioning correctly during operation.

Ice Production Cycle Stages

Describes the process from pre-cooling, ice making, to ice harvest and shutdown.

Control Panel Interface

LED Indicators and Display Codes

Explains the functions of the LED display codes and indicator lamps on the control panel.

Adjusting Ice Cube Thickness

Details how to adjust the ice cube thickness using the control panel buttons.

Activating Cleaning Function

Instructions for initiating and performing the cleaning and sterilization process via the control panel.

Safety Protection Features

Automatic Shutdown Triggers

Lists conditions that trigger automatic shutdown for safety, such as ice detection failure.

Troubleshooting Common Issues

Interpreting Fault Codes

Lists fault codes, their comments, and the corresponding machine actions or protective shutdowns.

Routine Maintenance Procedures

Exterior and Inlet Filter Care

Covers cleaning the outer enclosure, vents, and inspecting the inlet water filter.

Condenser and Water Pipe Maintenance

Details cleaning the condenser, condenser filter, and the internal water pipes.

Winter Storage Preparation

Instructions for preparing the ice machine for storage during winter.

In-depth Cleaning and Sterilization

Cleaning and Sterilization Steps

Step-by-step guide for manual and automatic cleaning and sterilizing cycles, including rinsing.

Service and Troubleshooting Guide

Preparing for Service Calls

Checks to perform before contacting a service technician for abnormal operation.

Common Faults and Their Solutions

Lists common issues like 'Not working', 'High temperature', 'High pressure' and their troubleshooting steps.

Advanced Fault Resolution

Ice Quality and Noise Troubleshooting

Addresses problems with ice transparency, thickness, and excessive noise with solutions.

Product Warranty Information

Warranty Exclusions List

Lists circumstances and damages not covered by the manufacturer's warranty.

Disposal and Compliance Information

Product Disposal and Recycling

Provides guidance on environmentally friendly disposal of the ice maker and packaging materials.

Environmental Responsibility

Encourages returning discarded electric appliances to collection centers for recycling.

Regulatory and Compliance Standards

Confirms product testing and approval to meet international, independent, and federal standards.

Blizzard BIM40 Specifications

General

Storage Capacity	20 lbs
Ice Type	Cube
Cooling Type	Air Cooled
Ice Production	40 kg/24h
Water Supply	Direct Water Line

Related product manuals