Blizzard BIM90 - User Manual

Questions and Answers

D
David GonzalezAug 8, 2025
What to do if my Blizzard BIM90 shuts down every 3 minutes and shows error E04 or E06?
- D
  David PayneAug 8, 2025
  If your Blizzard Ice Maker shuts down every 3 minutes after startup and displays E04 or E06, it could be due to several reasons. The ambient temperature might be too high; the normal working temperature range is 12-32 °C. The condenser might be dirty and blocked, requiring cleaning. Alternatively, the high pressure switch wires may have fallen off, needing reconnection, or the fan might not be starting, which requires inspection and correction.
W
Wesley SimpsonAug 13, 2025
Why is my Blizzard BIM90 too slow in ice making?
- S
  Sharon WigginsAug 13, 2025
  If your Blizzard Ice Maker is making ice too slowly, several factors could be responsible. The condenser or air filter might be dirty, requiring you to clean them. A high ambient temperature could be the cause; the normal working temperature range is 12-32 °C. Poor ventilation around the ice machine can also slow down ice production, so check the surrounding environment. Finally, ensure the water supply temperature is within the range of 5-35 °C, as high water temperature can also affect the ice-making speed.
M
Mark GibsonAug 18, 2025
Why are the ice cubes from my Blizzard BIM90 not transparent?
- J
  Jacob CarterAug 18, 2025
  If the ice cubes from your Blizzard Ice Maker are not transparent or are too thin/incomplete, there are a few things you can check. First, ensure that the ice thickness setting is correct. Low water pressure can also cause this issue, so verify that the water supply pressure is between 0.13MPa and 0.55MPa. The water temperature should be between 5-35 °C. Also, inspect the inlet water valve to make sure it is working correctly and is not dirty.
J
Joseph OlsenAug 23, 2025
Why is the ice defrosting abnormally in my Blizzard BIM90 Ice Maker?
- M
  Mark MartinAug 23, 2025
  If the ice in your Blizzard Ice Maker is defrosting abnormally, it could be due to a few reasons. The ambient temperature might be too low; ensure it's within the normal working range of 12-32 °C. Also, check the defrost valve to ensure it's functioning correctly. Finally, verify that the ice thickness setting is appropriately adjusted, as incorrect settings can lead to abnormal defrosting.
A
Andrew KentAug 28, 2025
How to fix a Blizzard Ice Maker when the indicator light is off?
- C
  Catherine PetersenAug 29, 2025
  If the indicator light on your Blizzard Ice Maker is off, it could be due to a couple of simple issues. First, make sure that the power switch is turned on. If it is, check the plug and socket to ensure they are properly connected.
C
cohenjohnSep 2, 2025
How to reduce noise from my Blizzard Ice Maker?
- S
  Sherri LoweSep 2, 2025
  If your Blizzard Ice Maker is making too much noise, it might not be placed on a level surface. Make sure the ice machine is leveled properly.