Self-Contained Ice Maker User Manual for Installation and Maintenance
Installation
Location for Installation
The ice machine should be installed in a proper location meeting the following conditions:
Indoor, not more than 2,000 meters above sea level.
Ambient temperature: 12-32°C.
Power supply: the rated voltage ±6%
Water source: potable water, 0.13MPa to 0.55MPa.
water temperature: 5-35°C.
The ice machine should be kept away from heat &
extreme cold sources, should avoid direct sunlight.
Schematic Diagram of Installation
There should be sufficient ventilation
space around the ice machine and
keep good ventilation.
The ice machine must be placed on a
floor sufficient to support its weight.
Socket for the ice maker must be
reliably grounded and with leakage
protection.
Proper floor drainage must be
provided near the installation location
of the ice machine.
Drain connection must incorporate an
air gap with no contact with the main
drain connection to prevent Ice
contamination in the storage bin.
To Next Page
Loading...
