Blizzard BIM90 - Warranty

Self-Contained Ice Maker User Manual for Installation and Maintenance
blocked
Water leaking
Inlet water filter has not been
replaced for a long time
valve
Check whether water leaks and
correct
Check and correct the inlet water filter
Too slow in ice making
The condenser or air filter is
dirty
High ambient temperature
Poor ventilation
Water temperature is too high
Clean the condenser and filter screen
Normal working temperature range of
12-32 °C
Check the environment around the ice
machine
Check the water supply temperature
of 5-35 °C
Too much noise
The ice machine is not placed
in a leveled foundation, or the
ice maker is not leveled.
Level the ice machine
Warranty
The following circumstances are not covered by the warranty:
 Normal cleaning or maintenance.
 Unauthorized modification of the ice machine or use of non-native parts.
 Damage caused by improper power supply, water supply and drainage.
 Damage caused by installing, cleaning, or maintaining of the ice machine not in accordance
with the instructions of this manual.
 Artificial damage
Note: Warranty service should be provided by an agent or repair organization approved
by the manufacture.
Note: this Manual is subject to any technical change without further notice. Please refer to the
nameplate on the product for exact information.