Self-Contained Ice Maker User Manual for Installation and Maintenance
from the water trough.
Put in proper amount of clean solution
manually followed by the clean and
sterilizing process instruction. Push the
“clean” button again, the ice maker will do
auto clean for about 15 minutes. Please
do spray cleaning to the evaporator at the
mean time to insure a complete clean.
When finished, the led display flash
“Clean” slowly again.
Drain the water from the water trough.
Put in proper amount of sterilizing solution
manually followed by the clean and
sterilizing process instruction. Push the
“clean” button again, the ice maker will do
auto sterilizing for about 15 minutes.
Please do spray sterilizing to the
evaporator at the mean time to insure a
complete sterilizing. When finished, the
ice maker will get into rinsing process; the
process will take about 25 minutes.
The ice maker will get back to do ice
making as soon as the clean process end.
Please throw away the next 5 batches ice
in case of cleaner remained.
To Next Page
Loading...
