UNPACKING
As protection during transit, the icemaker is packed on a pallet
surrounded by a heavy cardboard crate.
For moving the packed unit to site, use a fork lift truck with forks no
thicker than 40mm
When unpacking, carefully cut the retaining straps and lift the cardboard
crate up and away from the unit
Ensure the ice scoop is located inside the ice storage bin.
LOCATING
Position the icemaker in it’s final location and make sure everything need
for installation is present, such as:
• Power supply and disconnect switch
• Water supply and disconnect switch
• Waste water drain connection.
To prevent any intestinal infection to consumers of ice, please ensure that
the water available is drinkable. If in doubt, consult your supplier about
the possible installation of a water filter or conditioner.
To Next Page
Loading...
