CLEANING AND MAINTENANCE
Ensure the ice machine is well cleaned at least once a month or when the
ice cubes are improperly shaped
• Remove the spray platen from the interior of the evaporator case
• Thoroughly clean the spray platform by immersing in a solution of
lukewarm water and a descaling solution, then rinse thoroughly with
clean water
• Wipe clean the ice storage area using a mild detergent solution
• Rinse them thoroughly disinfect it’s surfaces with a neural
antibacterial cleanser
• Do not use any harsh abrasive cleaners or materials and always
clean the unit with a soft cloth.
CLEANING OF THE WATER CIRCUIT
Special attention must be observed to the importance of cleaning the
water system. To perform this cleaning, contact an appropriately
qualified person at least twice a year, if you are unsure, contact your
supplier in the first instance who should be able to recommend one.
It is recommended that a propriety brand of ice machine cleaner is used
to remove any mineral sediment and scale build up.
DISPOSAL
To protect the environment, observe all current local regulations. When
the machine has reached the end of it’s life, the following procedure must
be followed
1. All refrigerant and coils from the cooling circuit must be removed
by an authorised refrigeration contractor
2. Dismantle the machine and dispose of individual components in
appropriate recycling banks.
To Next Page
Loading...