53
Chapter 10 General functions
Alarm
› You can set two diferent alarm times with the IR-1200. Select in the main menu the option
ALARM. Now you can select the alarm number one or two. You can activate or deactivate the
„ON/OFF“ this function. Set the alarm time. Select the option „MODE“ to select the type of alarm
to be used (e.g. internet radio). Select a memory preset. Select the frequency with which the
alarm function is to be used (e.g. daily, once, etc.). Select the alarm signal volume. Confrm all
settings with „SAVE“. An alarm icon can now be seen on display and the alarm will go of at the
preset time.
Sleep function
› In the main menu, select the menu option „SLEEP“ to set the sleep timer. Use the „ S“ and „T“
buttons to set in 15 minute stages after which the device is to turn of. Confrm your selection
with „ENTER“.
Software upgrade
› You can search for a software upgrade manually and can also select under MENU › System set
tings › Software update, if the device is to automatically search for updates periodically. When a
new software version has been found, you will be asked if this is to be downloaded and installed.
All user settings are maintained.
Factory default settings
› Selecting this option resets all settings to a factory default setting. Only the software version
and the registration with the internet radio portal are maintained. You can select this option
under: MENU › System settings › Factory reset.
10
General functions
To Next Page
Loading...
