54
Chapter 10 General functions
Language
› Select System settings › Languages to choose a preferred language.
Setting the time
› Select System settings › Time setup to set the time. Select „AUTO“ to activate an automatic time
adjustment. „Daylight savings” determines whether you would like to use a summer or winter
time and with the „Time zone” you can select your area’s time zone. The unit will automatically
be kept up to date from the select source, when information becomes available. You can also
set the date and time manually by selecting „Date/Time Setup”. The format for settings will be
displayed as follows: dd-mm-yyyy and hh-mm AM/PM.
› The blinking digit indicates the digit feld to be set. Use the navigations buttons to set the time
and date and the „ENTER“ button to confrm.
12/24 hour display
› To select between an 12 and 24 hour display, select „Set 12/24 hour“ to make your selection.
-
To Next Page
Loading...
