BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
EXTERIOR CONSTRUCTION
Stainless steel front, back, top, and sides
One set of independent interlocking doors.
Heavy chrome plated tubular steel door handle
Vitreous fiber insulation at top, back, sides, bottom and doors.
INTERIOR CONSTRUCTION
29" x 41" x 28-1/4" (737mm x 1041mm x 718mm) oven compartment interior .
Porcelain-enameled steel baking compartment liner
OPERATION
2 sets of 3 tubular-type heaters
Direct acting snap - action thermostats
Slide vent - each section
2-1/3 HP blower motor operation, single speed
STANDARD FEATURES
Two 60 minute timers
Two year oven parts and one year labor warranty*
Five year limited door warranty*
* For all international markets, contact your local distributor.
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Roll-In with pan racks
RPR-20, with center divider and 10 racks
Racks for pan rack L9
Electric Options
Single phase wiring (208/240 volt)
2 speed motor (208/240 volt)
Electric buzzer with mechanical timer (each)
Conventional Rack-type Options
Stainless steel center divider
Rack guides (set of 2)
Racks (each)
6" (152mm) stainless steel legs
Transport cart option (CTRE)
Roll-In with dolly basket (DBRI-L)
MODEL RE-42
Electric Series Oven
RE-42
Project
Item No.
Quantity
Does not include rack, rack supports and center divider. Rolling equipment
must be selected from Available Options List.
All data is shown per oven section, unless otherwise indicated.
To Next Page
Need help?
General