Blomberg LDV02284 - Electrical Connection; This Appliance Must be Earthed

Dishwasher / User manual
11 / 44
EN
In󰀬allation
A
󰀬
be earthed
If the tted moulded plug is
not suitable for your socket,
then the plug should be cut
o󰀨 and an appropriate plug
tted.
De󰀬roy the old plug, which
is cut o󰀨 as a plug with a
bared cord could cause a
shock hazard if inserted into
a socket elsewhere in the
house.
The moulded plug on this
appliance incorporates a
13A fuse. Should the fuse
need to be replaced an ASTA
approved BS1362 fuse of
the same rating mu󰀬 be
used. Do not forget to ret
the fuse cover. In the event
of losing the fuse cover, the
plug mu󰀬 not be used until
a replacement fuse cover
has been tted. Colour of
the replacement fuse cover
mu󰀬 be the same colour as
that visible on the pin face
of the plug. Fuse covers
are available from any good
electrical 󰀬ore.

Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket in a
readily accessible position.
If the supply cord or the mains lead
is damaged please do not replace it
yourself. The supply cord or the mains
lead mu󰀬 be replaced by a Authorised
Service Agent or a similarly qualied
person.