Blomberg LDV02284 - Maintenance and Cleaning; Cleaning the Outer Surface of the Product; Cleaning the Interior of the Machine; Cleaning the Filters

32
Dishwasher / User manual
/44 EN

6
Service life of the product extends and
frequently faced problems decrease if it
is cleaned at regular intervals.
A
Unplug the product and turn
o󰀨 the tap before attempting
any cleaning procedures.
C
Do not use abrasive
sub󰀬ances for cleaning.
C
Clean the lter and impellers
at lea󰀬 once a week in order
for the machine operates
e󰀩ciently.


Wipe the outer surface and door
gaskets of the product gently with a mild
cleaning material and damp cloth. Wipe
the "Control panel" only with a slightly
damp cloth.


• Clean the interior of the machine
and the tank by running a
programme with or without
detergent based on the degree of
soil.
• If water has remained in the
machine, drain the water by
performing the procedures under
the topic "Canceling a programme".
If the water cannot be discharged,
remove the lters as specied in
the "Cleaning the lters" section
and check if there are any leftover
deposits that have accumulated at
the bottom of the machine, blocking
the water path. Clean if necessary.

Clean the lters at lea󰀬 once a week
in order for the machine operates
e󰀩ciently. Check if food residues are left
on the lters. If there are food residues
on lters, take them out and clean well
under running water.
1. Turn the micro filter (1) and coarse
filter (2) assembly counter clockwise
and pull it out from its seating.
2. Pull out the metal/plastic filter (3)
from the seating.
3. Press the two pawls on the coarse
filter inwards and separate the
coarse filter from the assembly.