EasyManua.ls Logo

Blomberg LDV02284 - Water Cut-Off Warning; Overflowing Warning; Procare

Blomberg LDV02284
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Dishwasher / User manual
31 / 44
EN
Operating the product

This programme is recommended
to be operated on each 1-2 months
for machine cleaning and necessary
hygiene. The programme should be
operated while the machine is empty.
In order to achieve an e󰀩cient result, it
is recommended to use together with
special machine cleaning agents.
C
Do not use this programme to
clean dishes. As it operates
in high temperatures, it is
harmful for the dishes.
C
Leave your dishes in the
machine for about 15
minutes to allow them cool
down after they are washed.
Your dishes will dry in a
shorter time if you leave
the door of your machine
ajar during this period. This
process will increase the
drying e󰀨ectiveness of your
machine.
󰀨
If mains water is cut or water inlet tap
is turned o󰀨 the machine cannot take
water in and E:02 icon will ash on the
programme indicator. As long as the
problem continues, washing programme
is paused and the water inlet is checked
regularly by the machine; when
the water is re󰀬ored E:02 icon will
disappear after a while and the washing
programme resumes.

If the machine intakes too much
water or there is leakage at any of the
components then the machine will
detect this and E:01 icon will ash on
the Programme indicator. As long as the
overowing continues safety algorithm
will be active and try to discharge the
water. If overowing 󰀬ops and safety
is assured, E:01 icon will disappear.
If E:01 does not disappear, there is
a permanent fault. In this case the
authorised service should be contacted.

Table of Contents

Related product manuals