Dishwasher / User manual
17 / 44
EN
Preparation
C
The be washing
performance in dishwashers
is obtained by using
detergent, rinse aid and water
softening salt individually.
C
Observe the inructions of
the detergent manufacturer
on the package when using
tablet detergents.
C
Contact the detergent
manufacturer if your dishes
are wet and/or if you notice
limescale spots particularly
on your glasses after the
washing programme is
over when using a tablet
detergent.
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the
highest level and perform an empty
run.
3. After the empty washing cycle,
review the user manual and
readjust the water hardness level so
as to suit the water supply.
4. Make the appropriate rinse aid
settings.
2
3
C
Use powder or liquid/
gel detergent in short
programmes without
prewash since the solubility
of the tablet detergent
changes depending on the
temperature and time.
In addition to the conventional tablet
detergents, there are also commercially
available detergent tablets that show
water softening salt and/or rinse aid
eect. Some types of these detergents
contain special-purpose components
such as glass and ainless eel
protectors. These tablets show their
eects up to a certain water hardness
level (21°dH). Water softening salt and
rinse aid mu also be used together
with the detergent if the water hardness
level is above the mentioned level.