Why is detergent or fabric conditioner not properly washed in my Blomberg WAF 1200 Washer?
If detergent or fabric conditioner is not being properly washed in your Blomberg washer, check if the detergent dispensing drawer or siphon is soiled. Also, if the softener is too viscous, try adding water to it.
Why is there residual matter on laundry after washing in my Blomberg Washer?
If you notice grey residues (fat residue) on your laundry after washing, increase the amount of detergent you are using. If you see white residual matter (detergent residue), brush it off and reduce the amount of detergent used in future washes.
Why is my Blomberg WAF 1200 Washer detergent foaming too much?
General| Type | Freestanding |
|---|---|
| Load Type | Front Load |
| Maximum Spin Speed | 1200 RPM |
| Spin Speed | 1200 RPM |
| Dimensions (H x W x D) | 85 x 60 x 54 cm |
Specifies the appliance's intended purpose and limitations for washing, rinsing, and spinning textiles.
Outlines crucial safety precautions for electrical connection, handling, and maintenance.
Provides essential safety guidelines for households with children present.
Step-by-step instructions for removing transit bars before operation.
Advice on selecting the right location and adjusting feet for stability.
Instructions for connecting the water inlet hose, including safety notes.
Guidance on how to connect the drain hose to a suitable outlet.
How to secure the drain hose and connect the appliance to mains power.
To Next Page