Blomberg WM 26110 NBL00 User Manual (English)

Questions and Answers:

T
Thomas SotoSep 12, 2025
Why is my laundry wrinkled after washing in my Blomberg WM 26110 NBL00 Washer?
- E
  Erica DavisSep 12, 2025
  If your laundry is wrinkled after washing in your Blomberg washer, here are some possible reasons: * Delay in unloading the washer. Unload the washer as soon as the wash cycle ends. * The wrong program cycle might have been selected. Select the proper program cycle for the laundry to be washed. * Excessive laundry might have been loaded in. Do not load the washer in excess.
P
Paul JacobsSep 12, 2025
Why don't my clothes smell like fabric softener after washing in my Blomberg Washer?
- J
  Joshua HamptonSep 12, 2025
  If clothes are stiff and/or do not smell like the fabric softener after washing in your Blomberg washer, consider these possible causes: * Using insufficient amount of detergent. If the water hardness is higher, using insufficient amount of detergent can cause the laundry to become stiff in time. Use appropriate amount of detergent according to the water hardness. * Softener being released early. You may have added too much softener beyond max fill line. * The detergent dispenser might be problematic. Water may be siphoned (pulling the softener into the washer early) during the fill or rinse cycles.
S
Sandra NicholsSep 13, 2025
Why does my Blomberg Washer keep spinning?
- D
  Destiny NicholsonSep 13, 2025
  If your Blomberg washer continuously spins and the remaining time does not count down, it could be due to: * There may be an imbalance of load in the drum. The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum. * The laundry in the drum may be tangled up too much. Laundry should be rearranged and re- spun. * No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the appliance and to its environment.
K
Karen BakerSep 14, 2025
Why is my Blomberg Washer full of suds?
- A
  alexandergeorgeSep 14, 2025
  If your Blomberg washer is completely full of suds or if suds are coming out of the dispenser during operation: * You are not using HE detergent or using an excessive amount of detergent. Push “Start/Pause/Cancel” button. Mix 2 cups of water with 1-2 tablespoon of fabric softener and pour it into detergent dispenser. Push “Start/Pause/Cancel” button again. Use proper amount of HE detergent next time you operate the washer.
A
andrewnewmanSep 15, 2025
Why is there water in my new Blomberg WM 26110 NBL00 Washer?
- J
  Joyce EstradaSep 15, 2025
  There may be some water in your appliance when you receive it. This is from the quality control process and is normal. It is not harmful to your washer. You should run a “sanitary” cycle without any clothes and laundry additives before the first use of your washer.

Blomberg WM 26110 NBL00 Specifications

General

Type	Freestanding
Capacity	6 kg
Spin Speed	1000 RPM
Energy Efficiency Class	A+++
Dimensions (H x W x D)	85 x 60 x 54 cm
Weight	65 kg
Color	White
Colour	White
Built-in display	Yes
Door colour	White
Drum material	Stainless steel
Maximum spin speed	1000 RPM
Delayed start timer	Yes
Child lock	Yes
Remaining time indication	Yes
Adjustable spin speed	Yes
Adjustable temperature	Yes
Water consumption per cycle	45 L
Width	60 cm
Noise Level (Washing)	59 dB
Water Consumption	45 L
Washing capacity	6 kg
Loading type	Front load

Summary

Your Washer

Washer Overview and Components

Identifies and describes the main external parts of the Blomberg automatic washer, including the detergent dispenser, loading door, and control panel.