To Next PageTo Next PageWhy does my Blomberg WM77110NBL01 Washer continuously spin?
If your Blomberg washer is continuously spinning, it may be due to an imbalance of load in the drum, so the automatic spin correction system might have been activated. The laundry in the drum may also be tangled; rearrange and re-spin the laundry.
How to fix excess foaming in my Blomberg WM77110NBL01 Washer?
To fix excessive foaming in your Blomberg washer, use the recommended amount of HE detergent appropriate for water hardness, soil level, and the amount of laundry. Ensure you are using HE detergent. Store detergent in a cool and dry place. If washing lace items, reduce the amount of detergent.
What to do if my Blomberg Washer does not drain water?
If your Blomberg Washer isn't draining, the drain hose might be folded, so check and straighten it if necessary. Also, the drain pump filter or the drain itself may be clogged. Clean the drain pump filter, and if your house drain pipes are clogged, call a plumber for assistance.
Why is my Blomberg WM77110NBL01 filling with water when cancelled?
If your Blomberg washer fills with water when a process is cancelled, it may be because there is hot water inside. For safety reasons, the water should be cycled in and out a couple of times.
Why does my Blomberg WM77110NBL01 Washer have detergent residue on clothes?
Detergent residue on clothes after washing in your Blomberg washer can be due to loading too much laundry. Select the proper program cycle and temperature for the laundry. Use the recommended amount of HE detergent. If washing in cold water, try using a liquid detergent. Ensure you are using the correct type of detergent, such as liquid detergent for cold wash cycles or detergents recommended for wools, handwashable, and delicate items.
Why does my Blomberg WM77110NBL01 Washer smell bad or have oily stains?
Oily stains on laundry from your Blomberg washer may be due to oily accumulations from prior wash cycles on the drum. Operate the washer empty at sanitary cycle with detergent. Also, ensure detergent is placed in the correct compartment and not mixed with softener. For monthly cleaning of the drum, refer to the section on “Cleaning the Drum.” Leaving the dispenser drawer and loading door ajar after each washing can also prevent odor and bacteria buildup.
What should I do if my Blomberg WM77110NBL01 is leaking water?
If you see water coming from the bottom of your Blomberg washer, check the inlet hose connections to ensure the strainers and rubber seals are solid and securely fitted. Make sure the end of the drain hose is tightly attached to the waste pipe or sink. If the house drain is clogged, call a plumber. Also, ensure the filter cap of the drain pump is tightly closed. If the internal hose connections inside the washer are leaking, have them checked by a service technician.
What to do if my Blomberg Washer is making too much noise?
If your Blomberg washer is vibrating or making excessive noise, first adjust the washer feet. Ensure the shipping bolts have been removed. Adding more laundry may help even load distribution. If the drum is overloaded, reduce the amount of laundry. Also, make sure that the appliance isn’t touching any solid surface.
Why is my Blomberg WM77110NBL01 taking longer than the specified cycle time?
Several factors can cause your Blomberg washer to take longer than usual. Low water pressure will cause the washer to wait until there is enough water, lengthening the cycle. Low supply voltage or low inlet water temperature can also extend the cycle time. An imbalance of load in the drum can activate the automatic spin correction system. Finally, the number of rinse cycles might have increased. Try using a proper amount of HE detergent, and reduce the amount next time.
Why is my Blomberg WM77110NBL01 Washer not spinning?
If your Blomberg washer isn't spinning, it could be due to an imbalance of load in the drum. The laundry may be tangled, so rearrange and re-spin it. Add more laundry if there are only a few items. Check the drain hose for folds and straighten if necessary. Make sure the “No spin” setting isn't selected. Clean the drain pump filter, and if the house drain pipes are clogged, call a plumber. Use the recommended amount of HE detergent. Select the proper temperature for the laundry. Sort the wash load by color. Set your water heater for delivering 120-140F (48-60 C) hot water.
Essential safety guidelines to prevent accidents and damage during operation.
Critical warnings regarding hazardous substances, electrical safety, and appliance misuse.
Further safety advice including extension cord usage, component replacement, and proper maintenance.
Guidance on selecting an appropriate location for the washing machine.
Specifies required space around the washer for ventilation and access.
Details clearances for built-in installations under counters and in closets.
Critical step to remove bolts securing the drum during transit.
Proper electrical hookup and grounding requirements.
Required electrical supply, circuit breaker, and connections.
Instructions for connecting cold and hot water hoses to faucets.
Guidelines for connecting the drain hose to a sink, standpipe, or floor drain.
How to select wash cycles and understand program types.
A comprehensive chart detailing cycle options, load types, and settings.
Steps to initiate and control wash cycles, including pause and standby.
Instructions for cleaning the drain pump filter to ensure proper drainage.
Solutions for problems like no water, slow filling, or water discharging immediately.
Troubleshooting steps for issues with the washer not draining or draining slowly.
Identifying and resolving issues causing excessive noise or vibration.
General