To Next PageTo Next Page
Need help?Do you have a question about the BluDot Open Plan and is the answer not in the manual?
General| Brand | BluDot |
|---|---|
| Model | Open Plan |
| Category | Indoor Furnishing |
| Language | English |
Attach the top, center, and bottom panels to the center front leg using hardware. Ensure correct leg usage.
Attach the center back leg using the provided hardware. Ensure correct orientation and alignment.
Place metal pins in the center back panel and align with back panel pieces as shown.
Align metal pins in the back panel and attach the side frames using the provided hardware.
Carefully flip the bookcase and secure side frames in place using the provided hardware.
Insert partition panel at an angle, attach side frames, and tighten bolts from previous steps.
Install hinges to the doors as shown using the provided hardware. Ensure correct placement.
Install the doors onto the assembled bookcase structure using the provided hardware.
Install anti-tip brackets to the back rail of the top panel, drilling pilot holes if needed.
Secure anti-tip bracket to the wall, using appropriate anchors or drilling into studs.
Install and tighten wall straps. Adjust glides at the bottom of legs for leveling.
Adjust hinges in pairs for proper door alignment (top/bottom, side/side, front/back).
Clean with a damp, soft cloth. Use wood furniture cleaners for dirt/fingerprints. Wipe dry.
