Need help?Do you have a question about the Blue Moon Health Source POINTER EXCEL II and is the answer not in the manual?
General| Brand | Blue Moon Health Source |
|---|---|
| Model | POINTER EXCEL II |
| Category | Personal Care Products |
| Language | English |
Precautionary measures for patients suspected of having heart disease.
Do not stimulate over carotid sinus nerves, especially with sensitivity.
Risk of severe spasm closing the airway when stimulating neck/mouth.
Stimulation may inhibit demand cardiac pacemakers; not recommended.
Safety of electrical nerve stimulation during pregnancy not established.
Symptomatic treatment may mask disease progress; potential dependence.
Identifies key controls like probes, buttons, knobs, and displays.
Controls sensitivity for trigger point location, indicated on digital display.
Controls output intensity and power; located on the left side.
Activates stimulation mode; emits continuous electric pulse.
Adjusts stimulation frequency from 1 Hz to 16 Hz.
Displays frequency and sensitivity levels during operation.
Reverses polarity for tonification (+) or sedation (-).
Lights up when point location or stimulation mode is active.
Facilitates circuit completion for detection/stimulation.
Connection point for the hand grounding pole.
Shows frequency and sensitivity numerically. Guides acupuncture point location.
Allows switching between tonification (+) and sedation (-) modes.
Enables immediate treatment of detected points via the probe.
Provides constant, comfortable pressure for accurate point location.
Two probes are included for ear and body applications.
Allows adjustment of point detection sensitivity based on skin conditions.
Accessory to complete the electrical circuit for patient treatment.
Adjusts stimulation frequency between 1 Hz and 16 Hz.
Located on unit to help users complete the circuit.
Correctly insert the 9V battery, matching polarity.
Use supplied probes as prescribed by a practitioner.
Touch grounding plates and use probe's spring mechanism to find points.
Locate points by sound and flashing LED; adjust sound via trimmer.
Adjust intensity using "INT" knob and activate stimulation.
Use micro current intensity in the "blue" zone for subtle stimulation.
Attach grounding pole to complete the electrical circuit for treatment.
Set polarity switch for tonification (+) or sedation (-) pulse.
Monitors frequency and sensitivity during operation.
Turn off unit and remove battery for extended periods of non-use.
To Next Page