Issue Reporting
We're always trying to make our documentation, instructions, software, and user experience better. If
you're having an issue with anything, please report it so that we can address it as soon as possible! Here's
where to do that depending on what's wrong:
ArduSub Issues: For anything related to the ArduSub software that runs on the Pixhawk and controls the
ROV, reports issues on the ArduSub Github Issues Page (https://github.com/bluerobotics/ardusub/issues). If
you're unsure where your issue should be posted, you can report it here.
QGroundControl Issues: For anything related to the QGroundControl software, joystick setup, video
streaming, etc., please report an issue on the QGroundControl Github Issues Page
(https://github.com/mavlink/qgroundcontrol/issues).
Documentation: For anything related to the documentation and instructions here, please report an issue by
submitting an e-mail to support@bluerobotics.com (mailto:support@bluerobotics.com).
BlueROV2 Operation
(https://bluerobotics.com/learn/bluerov2-operation/)
Learn how to operate your newly built BlueROV2!
Navigation
Guides in this Series
Software Introduction
QGroundControl Installation, Network
Setup and Joystick Setup
Testing the Connection to the
BlueROV2
To Next Page
Loading...
Need help?
General
