5
Once successfully paired, you will hear “Device Connected” and the LED will ash blue, once
every two seconds indicating the Headset and Bluetooth Device are connected. The
Headset may be paired to a new Bluetooth Device using the above procedure. Note that
this will undo the pairing to the current Bluetooth Device.
Once the Headset and Bluetooth Device have been paired, the Headset and Bluetooth
Device will automatically reconnect the next time they are both powered on and in close
proximity to each other.
Multipoint Pairing
It may be useful to have the Headset connected to 2 devices simultaneously. For example,
to 2 dierent smartphones, or to a phone and a laptop computer. This is called Multipoint
pairing. For Multipoint pairing:
1. Turn o Bluetooth on the 1st connected Device.
2. Turn on Bluetooth on the second Device.
3. Initiate Pairing on the Headset (refer to Pairing section).
4. Pair the Headset with the second Device. You should hear an alert, “Device Connected”.
5. Turn ON Bluetooth on the 1st Device. Using the Device Bluetooth search menu,
reconnect to the AdvantagePLUS Headset. You should hear a second “Device
Connected” alert.
Your Headset is now connected with both devices and can now accept a call or listen to
audio/video from either device.
For more information or assistance with Multipoint Pairing, please contact Customer
Support (see Warranty and Customer Support section).
PHONE CALLS
Answer Call
To answer a phone call, tap or press the Multi-Function Button (MFB) for 0.5 seconds or less.
End Call
To end a call (hang up), press and hold the MFB for 1 second.
Ignore Incoming Call (1st or 2nd call)
Press and hold the MFB for 1 second.
Answer 2nd Incoming Call
To answer a second incoming call and end the ongoing call, tap or press the MFB for 0.5
seconds.
To answer a second incoming call and place the ongoing call (the rst call) on HOLD, double
press the MFB. To end the second call and resume the 1st call on HOLD, tap or press the
MFB for 0.5 seconds.
To Next Page
Loading...
