Blue Tiger Advantage PLUS - Mic Boom Tension & Headband Disassembly

9
Stop Point
MIC BOOM TENSION & HEADBAND
DISASSEMBLY
The microphone boom position tension can be adjusted. Simply tighten or loosen the mic
boom by tightening or loosening the Boom Tightening Knob (Set Screw) as shown.
1. Loosen the Headband Set Screw (counterclockwise) or tighten (clockwise) to loosen or
tighten the boom position up or down.
It is not necessary to disassemble your Advantage PLUS Headset. However, if the headband
were to become separated from the mic boom, simply reattach it as shown and tighten the
Set Screw. This feature allows for future accessories.
2.
Reattach the Bluetooth Headset Module (mic boom) to headband and tighten the Set Screw.