RASPBERRY SPECIFICATIONS
• Power Requirement: Powered via USB or Lightning connector
• Transducer Type: Electret Condenser, 14mm
• Polar Pattern: Cardioid (Unidirectional)
• Bit Depth: 16-bit/24-bit
• Sampling Rate: 44.1/48 kHz
• Frequency Response: 20Hz – 20kHz
• Adjustable Gain: 0 to +40dB
• Maximum SPL: 120 dB SPL (THD: 0.5% 1kHz)
• Mount Thread: 1/4” diameter, 20 threads per inch (standard camera mount)
• Microphone Stand Adapter: 5/8-27 thread (standard microphone stand mount)
• Headphone Jack: 3.5mm (1/8 inch)
• Headphone Amp Impedance: 32 ohm
• Dimensions and Weight:
Mic only
L = 39.5 mm W = 50.5 mm H = 123 mm
Weight = 167.1g
Mic with stand (collapsed)
L = 46.75 mm W = 58.5 mm H = 147.5 mm
Weight = 272.3g
To Next Page
