13
EN
USAGe oF THe roboT
USAGE OF MAGNETIC STRIP
The magnetic strip is used for setting no-go areas such as petfood bowls and
children’s toys, to prevent the robotic vacuum from going into a place you
don’t want it to.
1 Conrm the no-go area that you don’t want the robotic vacuum in.
2 Cut the magnetic strip based on the length and width of the area measured.
Note: the minimum length of a magnetic strip should be 1 meter. A 5 meter strip is
available for sale, which can be cut in a preffered length.
3 Fix the magnetic strip on the boundary of the planned oor using double-sided
adhesive tape. And ensure that it is at and not tilted at both ends
Double Sided Adhesive Tape
To Next Page
Loading...