BLUEBOT EZ1 - Maintenance Procedures; Side Brush and Suction Inlet Care; Water Tank and Dustbin Cleaning

15
EN
7. mAiNTeNANce
SIDE BRUSH | REGULAR CLEANING
1 Turn over the robot and pull the side brush out and upwards
2 Remove hair and dirt and reassemble the side brush.
SUCTION INLET | WEEKLY CLEANING
1 Turn over the robot and wipe the suction port with a clean and dry cloth.
ELECTRICALLY-CONTROLLED WATER TANK | REGULAR CLEANING
1 Press the button and pull the dustbin out backwards.
2 Open, empty and clean the dustbin.
Warning 2-in-1 water tank & dustbin:
Make sure to empty the watertank before letting the robot start charging on the
charging station.