blueclean sp116 - Page 6

Work station series for solar water heating control system
4
2 x NTC10K sensor temperature probe≤135℃,
PVC cable ≤105℃
Output signals
1 x Auxiliary heating output (Max. load current: 10A)
2 x Relay output (Max. load current: 3A)
System design pressure 10 bar
Safety valve response pressure 6 bar
WILO pump SR15/6
Ambient temperature -10~50℃
Water protection grade
IP40
4. Display signals
Weekday: 7days of week can be set (e.g. Week 1 means “Monday”).
Time: Setting hours and minutes.
Time-controlled auxiliary heating: Setting three heating time periods.
Time-controlled hot water circulation: Setting three time periods.
Storage temperature: As turning-on/off temperature value for auxiliary heating.
Frost protection.
Overheating protection for storage.
High temperature protection for solar collector.
Holiday function.
Switch on/off auxiliary heating manually.
Reset.
Temperature display.
Flow rate display.