bluelab Combo Meter Care And Use Guide

English
2
Features
Measures pH, conductivity / nutrient (EC, CF, ppm 500 and ppm 700)
and temperature (°C, °F)
Lightweight and portable Replaceable double junction pH probe
Large easy to read display Over range and under range indicators
Simple push button pH calibration Low battery indicator
Successful pH calibration indicator 2 x AAA alkaline batteries included
No calibration required for conductivity
and temperature
Auto off function
Bluelab Combo Meter
Low battery
indicator
Successful pH
calibration indicators
Temperature units
pH unit
Nutrient
units
Keep your pH probe tip wet
at all times to avoid permanent damage
pH probe
connection
socket
(BNC tting)
Conductivity/
temperature
probe shroud
pH/calibrate
button
Nutrient/units
button
Display
Bluelab
Conductivity/
Temperature
Probe
Bluelab
pH Probe
Temp/units
button
pH probe storage cap
The pH probe tip must not be allowed to dry out. Always place
the storage cap back onto the pH probe after each use.
Ensure the cap contains enough Bluelab pH Probe KCl
Storage Solution to cover the probe tip.

bluelab Combo Meter Specifications

General

Measures	pH, Conductivity, Temperature
pH Range	0.0 - 14.0 pH
Power Source	2 x AAA batteries
Resolution pH	0.1 pH
Accuracy pH	±0.1 pH
IP Rating	IP67
Temperature Range	0 - 50 °C / 32 - 122 °F
Resolution Temperature	1 °C / 1 °F
Accuracy Temperature	±1 °C (±2 °F)
ATC	Yes
Dimensions	185 mm
Accuracy EC	±0.1 EC