To Next PageTo Next Page
Need help?Do you have a question about the Blueridge BMHH48M22C and is the answer not in the manual?
General| SEER Rating | 22 |
|---|---|
| HSPF Rating | 10 |
| Voltage | 208/230 V |
| Phase | 1 |
| Refrigerant | R-410A |
| Cooling Capacity | 48000 BTU/h |
| Heating Capacity | 48, 000 BTU |
Emphasizes reading the manual before installation to prevent damage or injury.
Guidelines for selecting an appropriate installation location for the outdoor unit.
Instructions on how to securely fix the outdoor unit using anchor bolts.
Details minimum clearances required around the outdoor unit for optimal operation.
Critical safety warnings for handling and connecting refrigerant pipes.
Guide for correct pipe flaring dimensions and tightening torques.
Detailed steps for properly flaring pipe ends to achieve an airtight seal.
Procedure for connecting the copper pipes to the indoor and outdoor units.
Specifies the correct tightening torque values for connecting refrigerant pipes.
Essential safety warnings and guidelines for performing electrical wiring.
Mandatory safety warning to turn off main power before performing any electrical work.
Step-by-step instructions for conducting a leak test using nitrogen.
Procedure for performing a vacuum test and verifying its completion.
Procedure for calculating and adding refrigerant based on lineset length and system configuration.
Chart and directions for calculating the amount of refrigerant to add based on model and lineset length.
Detailed instructions for performing the test run on both indoor and outdoor units.
