EasyManua.ls Logo

Blueridge BMHH18M22C - User Manual

Default Icon
38 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SPLIT-TYPE ROOM AIR CONDITIONER
Owner’s Manual &
Installation Manual
IMPORTANT NOTE:
Read this manual carefully before installing
or operating your new air conditioning
unit. Make sure to save this manual for
future reference.
Please check the applicable models, technical
data, F-GAS(if any) and manufacturer information
from the “Owner's Manual - Product Fiche ”
in the packaging of the outdoor unit.
(European Union products only)

Table of Contents

Other manuals for Blueridge BMHH18M22C

Preview: Installation Manual
Installation Manual25 pages

Questions and Answers

  • G
    Gabriel BrowningAug 9, 2025
    Why is my Blueridge BMHH18M22C Air Conditioner not cooling properly?
    • J
      James JohnsonAug 9, 2025
      If your Blueridge Air Conditioner isn't cooling well, several factors could be the cause. The temperature setting might be higher than the room's ambient temperature. The heat exchanger on either the indoor or outdoor unit could be dirty, requiring cleaning. A dirty air filter can also reduce performance; remove and clean it as instructed. Obstructions blocking the air inlet or outlet should be removed after turning the unit off and then back on. Ensure doors and windows are closed to prevent heat entry, and use curtains to block excessive sunlight. Reduce the number of heat sources in the room, and check for refrigerant leaks, resealing if necessary and topping off the refrigerant. Finally, ensure the SILENCE function is deactivated.
  • A
    Amanda HillAug 18, 2025
    What to do if Blueridge Air Conditioner does not turn on?
    • B
      Barbara WalkerAug 18, 2025
      If your Blueridge Air Conditioner doesn't turn on, check the following: If there was a power failure, wait for the power to be restored. If the power is off, turn it on. Also, try replacing the fuse or the batteries.
  • D
    David JacobsonAug 28, 2025
    Why does my Blueridge BMHH18M22C Air Conditioner keep turning on and off?
    • T
      Thomas PatelAug 28, 2025
      If your Blueridge Air Conditioner starts and stops frequently, you should check for leaks and recharge the system with refrigerant. Another solution is to evacuate and recharge the system with refrigerant. You may also need to replace the compressor or install a manostat to regulate the voltage.

Summary

Safety Precautions

WARNINGS FOR PRODUCT USE

Important safety warnings for operating the air conditioner, including handling abnormal situations and misuse.

CLEANING AND MAINTENANCE WARNINGS

ELECTRICAL WARNINGS

Critical safety warnings related to electrical connections, wiring, and power supply.

WARNINGS FOR PRODUCT INSTALLATION

Essential warnings and guidelines for safe and correct installation of the air conditioner unit.

WARNING for Using R32;R290 Refrigerant

Specific safety guidelines and room size requirements for units using R32 or R290 refrigerant.

Troubleshooting

SAFETY PRECAUTIONS

Critical safety warnings to follow immediately if specific abnormal conditions occur with the unit.

Common Issues

Common problems encountered with the unit and their possible causes and solutions.

Poor Cooling Performance

Troubleshooting steps for poor cooling performance, including checking settings, filters, and refrigerant.

The unit is not working

Solutions for when the unit fails to start or stops frequently, including power, fuse, and timer issues.

Poor heating performance

Troubleshooting steps for inadequate heating performance, considering temperature, doors, windows, and refrigerant.

Indicator lamps continue flashing

Guidance for interpreting flashing indicator lamps and error codes, and steps to resolve them.

Indoor Unit Installation

Drill wall hole for connective piping

Prepare refrigerant piping

Connect drain hose

Electrical Safety Regulations

Important regulations and warnings to adhere to before performing any electrical work on the unit.

Connect signal cable

Wrappiping and cables

Mount indoor unit

Refrigerant Piping Connection

Cut pipes

Remove burrs

Flare pipe ends

Connect pipes

TORQUE REQUIREMENTS

Instructions for Connecting Piping to Outdoor Unit

Air Evacuation

Preparations and Precautions

Important preparations and precautions before performing evacuation to remove non-condensable gas and moisture.

Evacuation Instructions

Note on Adding Refrigerant

Electrical and Gas Leak Checks

Electrical Safety Checks

Procedures for performing electrical safety checks, including grounding and wiring verification.

Gas Leak Checks

Methods for checking for gas leaks using soap and water or a leak detector.

Test Run

Test Run Instructions

Detailed instructions for performing the test run, including operating modes and checks to perform.

Blueridge BMHH18M22C Specifications

General IconGeneral
BrandBlueridge
ModelBMHH18M22C
CategoryAir Conditioner
LanguageEnglish

Related product manuals