- 10 -
HIGH-SHELF / STANDARD BACKGUARD / ISLAND TRIM
A standard backguard for the unit must be mounted before the unit is placed in its final position.
Installation instructions are located with your backguard, high-shelf and/or
island trim.
Note: If the island trim option is used without the 6” clearance
recommended, a non-combustible rear wall extending a minimum of 6”
below the countertop must be used. In no cases will we accept
responsibility for claims which may result from heat damage to a rear
wall or counter, including cosmetic damage. It is the responsibility of
the owner/end user to ensure that the material used in such applications
is not only non-combustible, but is also truly heat resistant.
Rear of Range
(6) Sheet Metal Screws
To Next Page
Loading...
