EasyManua.ls Logo

Bluestream BS7330 - Bluetooth Connectivity; Pairing Bluetooth Devices; Playing Audio via Bluetooth

Bluestream BS7330
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
POWER
AC POWER (Wall Outlet)
1. Plug the supplied AC Power Cord into the AC Socket (31) on the rear of the unit.
2. Insert the wall plug of the AC Power Cord into an electrical wall outlet.
3. To turn the unit ON press the STANDBY button (4).
BATTERY POWER
1. Open the Battery Compartment (28) by gently sliding the compartment door in the
direction indicated on the bottom of the unit.
2. Insert 8 ‘D’ size batteries (not included) into the Battery Compartment (28). Be sure
to place
the batteries in the same polarity (+ or -) direction indicated on the engraved
diagram inside the Battery Compartment (28).
3. Replace the door to the Battery Compartment (28) by carefully sliding it back into
place.
4. To turn the unit ON press the STANDBY button (4).
VOLUME
The volume is adjusted by turning the VOLUME Knob (15) on the left side of the unit.
To Increase the Volume: Rotate the VOLUME Knob (15) clockwise to the right.
To Decrease the Volume: Rotate the VOLUME Knob (15) counterclockwise to the
left.
PAIRING A BLUETOOTH DEVICE
Before using a Bluetooth device you must first Pair the device with the BS7330
1. Turn your Bluetooth device OFF entirely and then turn it back ON to refresh the
device’s Bluetooth Memory.
2. Find the Bluetooth menu on your device and make sure the Bluetooth function is
turned ON. (Refer to your device’s user manual for instructions on finding the
Bluetooth menu)
3. Press the FUNCTION button (17) repeatedly untilBTappears on the LCD Display
(9).
The POWER / BT Indicator (11) will begin flashing Blue to indic
ate the BS7330
is ready to pair with your device
4. On your device perform a Bluetoothdevice discovery to add the BS7330 as a new
device.
5. When the BS7330 is discovered your device will display BS7330” in the Bluetooth
menu.
6. If your device asks for a password, enter0000and the device will now pair with the
BS7330 and be ready to use.
NOTE: the BS7330 will make a chime when your device has successfully paired
7. If supported by your device, set the BS7330 asauthorized in the Bluetooth menu.
LISTENING TO A BLUET
OOTH DEVICE
After successfully pairing your Bluetooth device with the BS7330, you can begin playing
music simply by choosing the song you wish to hear on your device’s menu system (refer to
your device’s user manual for instruction on playing music).
To Play or Pause music press the PLAY / PAUSE / FM STEREO button (5)
To Skip to the Next song press the NEXT / F.FWD button (2)
To Skip to the Previous song press the PREV / F.REV button (1)
NOTE: All Playback controls (Play, Pause, Skip + / -, etc.) can also be controlled d
irectly on
your Bluetooth device.